| Customization: | Available |
|---|---|
| Color: | Silver |
| Application: | Transportation Tools, Door & Window, Decorations |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: Each |
Others: Total |
Al: Min. |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.05 | 0.03 | 0.03 | - | 99.60 |
1060 aluminum alloy is formed by pure aluminum added by a small amount of copper element, which has excellent forming processing characteristics, high corrosion resistance, good weld ability and conductivity.
1060 aluminium alloy sheet can be used as anodized aluminum sheet, deep drawing aluminum, good mechanical properties
| Alloy Temper | Specified | Tensile strength | Yield strength | Elongation | |||||||||
| Thickness(mm) | (MPa) | (MPa) | (%) | ||||||||||
| 1060-O (annealed) | 0.006-0.019 | 8.0-14.0 | 2.5 | Min15 | |||||||||
| 0.020-0.050 | Min22 | ||||||||||||
| 0.051-3.000 | Min25 | ||||||||||||
| 1060-H12/ 1060-H22 | 0.017-0.050 | 11.0-16.0 | 9.0 | Min6 | |||||||||
| 0.051-2.000 | Min12 | ||||||||||||
| 1060-H14/ 1060-H24 | 0.006-0.019 | 12.0-17.0 | 10.0 | Min1 | |||||||||
| 0.020-0.050 | Min5 | ||||||||||||
| 0.051-1.000 | Min10 | ||||||||||||
| 1060-H16/ 1060-H26 | 0.006-0.019 | 14.0-19.0 | 11.0 | Min1 | |||||||||
| 0.020-0.050 | Min4 | ||||||||||||
| 0.051-0.162 | Min5 | ||||||||||||
| 1060-H18/ 1060-H28 | 0.006-0.019 | Min16.0 | Min12.0 | Min1 | |||||||||
| 0.020-0.050 | Min3 | ||||||||||||
| 0.051-0.128 | Min4 | ||||||||||||
| 1060-H112 | 0.250-0.499 | Min11.0 | Min7.0 | Min10 | |||||||||
| 0.500-1.000 | Min10.0 | Min5.0 | Min20 | ||||||||||
| 1.001-3.000 | Min9.0 | Min4.0 | Min25 | ||||||||||
1060 aluminum sheet has the characteristics of excellent electrical conductivity, thermal conductivity, plasticity, and extensibility of pure aluminum, but its own strength is low, it cannot be strengthened by heat treatment, and machinability is not good.Electrical conductivity 55% of copper.
aluminum sheet interleaved with paper
The same as 1050 aluminum sheet, the aluminum sheet 1060 is widely used in products with low strength requirements, such as chemical instruments, sheet metal processing parts, deep drawing or spinning concave containers, welding parts, heat exchangers, clock surfaces and disk surfaces, nameplates, kitchenware, decorations, reflectors and so on.
Because the production process of 1060 aluminum sheet is relatively single, the technology is relatively mature, and the market price is very advantageous.
1060 alloy aluminum may be forged in the temperature range of 950 to 700 F. Hot working, If required, may be done in the range of 900 to 500 F.
The cold working characteristics of AL 1060 are excellent. It can readily be cold worked by all conventional methods. Annealing may be done at 650 F followed by air cooling.1060 aluminium alloy metal hardens only from cold working. Tempers H12, H14, H16, H18 are determined by the amount of cold working imparted into the alloy.
1060 aluminum sheet Have good elongation and tensile strength, can satisfy completely the requirements of conventional processing (stamping, stretch) high formability.
For industrial pure aluminium, high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but strength is low, heat treatment can not be improved machinability is bad; Gas welding, hydrogen welding and resistance welding, is not easy to brazing; Under various pressure processing and extension, bending.
It is often used in the industrial manufacture of large storage tanks. So, It's also a commonly used industrial pure aluminum in the aluminum sheet family.
1060 aluminum sheet is also used in products with low requirements for strength. Such as face mask nose wire, billboards, nameplates, building exterior decoration, kitchen sinks, lamp holders, fan leaves, electronic parts, clock and disk surfaces, reflective appliances, etc.
packages of 1060 aluminum sheet
1060 aluminium alloy wikipedia
| Dimension | Range |
| Thickness | 0.5 ~ 6.0mm for sheet,max 500mm |
| Width | 600 ~ 2,200mm |
| Length | 2,000 ~ 10,000mm |
1mm 1060 Aluminum Sheet
2mm 1060 aluminum sheet
3mm 1060 aluminum sheet
4mm 1060 aluminum sheet
5mm 1060 aluminum sheet
6mm 1060 aluminum sheet
1 inch 1060 aluminum sheet
10 gauge 1060 aluminum sheet
12 gauge 1060 aluminum sheet
14 gauge 1060 aluminum sheet
16 gauge 1060 aluminum sheet
20 gauge 1060 aluminum sheet
Tigers aluminum is a leading manufacturer and supplier of aluminium 1060 sheets in compliance with ASTM B209, EN 573 and EN 485 standards.
As one of the most useful 1060 alloy aluminum, 1060 aluminum sheet has super quality, competitive price and many other advantages.
Another 1060 aluminum sheet feature worth to mention is good reflectivity. Therein, reflective aluminum sheet can be processed into all kinds of profiles in order to play various roles in our life.
Tigers aluminum is with large stocks of aluminium sheets and plates and cut to size aluminium sheet profiles. We specialise in the supply of aluminium sheet cut circles, sheet, disk, and painted coating.
Tigers aluminum as a professional manufacturer and supplier of 1060 aluminum sheet, we can provide you 1060 aluminum alloy metal sheets , which are used in diverse industrial applications.We have reliable quality, reasonable prices and prompt delivery. Common specifications are in stock. Special sizes can be customized according to clients' requests.Please contact us if you have any questions.
){kind=link}