6063 aluminum pipe is made from a popular heat treatable magnesium/silicon alloy. This alloy has excellent corrosion resistance and weldability. Due to its finer grain structure, this is an excellent alloy choice for anodizing. Applications include air cylinder, electrical bus conductor and architectural.
STOCK SIZE RANGE:
Tempers: T6
Specifications: ASTM B221, ASTM B241, ASTM B429, AMS-QQ-A-200/9
Typical Chemical Composition %
| Weight % |
Si |
Fe |
Cu |
Mn |
Mg |
CR |
Zn |
TI |
Each |
Total |
| Minimum |
.020 |
|
|
|
.45 |
|
|
|
|
|
| Maximum |
.60 |
.35 |
.10 |
.10 |
.90 |
.010 |
.10 |
.10 |
.05 |
.15 |
Remainder Aluminum
Typical Mechanical Properties
| Temper |
Tensile |
| |
Ultimate |
Yield |
Elongation |
| |
KSI |
MPA |
KSI |
MPA |
% |
| T6 |
35 |
240 |
31 |
215 |
1 |
Product Information:
1. Shape: Customized as per drawing
2. Material Available:1000series ~ 7000series
Model & Capacity of Our Equipment
| Model |
Qty. |
Function |
Size of extrusion barrel(mm) |
Outlet size of compression machine(mm) |
Size of extruder rod(mm) |
Weight of Aluminium bar |
Remarks |
| 630T |
2 |
Forward single action extrusion |
Ф95*500 |
Ф130*150 |
Ф90*450 |
6.8KG |
|
| 1000T |
1 |
Forward single action extrusion |
Ф132*600 |
Ф150*180 |
Ф127*550 |
17.8KG |
|
| 1350T |
1 |
Forward & reverse double-acting extrusion |
Ф155*650 |
Ф180*200 |
Ф150*600 |
26KG |
Maximum outer diameter of reverse extrusion seamless pipe: Ф40*2
Maximum outer diameter of forward extrusion seamless pipe:Ф120*60 |
| 2500T |
1 |
Forward & reverse double -acting extrusion |
Ф236*950 |
Ф310*370 |
Ф229*900 |
93KG |
Maximum outer diameter of reverse extrusion seamless pipe: Ф80
Maximum outer diameter of forward extrusion seamless pipe:Ф180 |
| 3600T |
1 |
Forward double -acting extrusion |
Ф320*1200 |
Ф400*520 |
Ф310*(550-1100),Ф280*(550-1100) |
112KG-224KG |
Maximum outer diameter of forward extrusion seamless pipe: Ф127
Maximum outer diameter of forward extrusion seamed pipe:Ф230-250 |
| Auxiliary equipment: 1 set 7m aging furnace and 1 set 14m aging furnace |
Factory & Products Pictures
What is Aluminium Extrusion?
Extrusion is the introduction of a heated aluminium ingot into a container and forcing it at high pressure through the profiled opening of a die which corresponds to the cross-section of the extrusion.
Why Aluminium Extrusion?
More and more people are realizing the benefits that aluminium extrusion can offer: The unique properties of aluminium in combination with the virtually unlimited opportunities the aluminium extrusion process gives to adapt product shape to innovate, reduce cost and maximize efficiency. From automotive to architecture, furniture to facades, lifts to lighting, the use of aluminium extrusions is extensive and new applications are being discovered every day.
Besides, the cost of aluminium extrusion is significantly lower than other processes, such as casting or forming and other extrusion processes such as plastic. Costs vary depending on the size, type, and complexity of extrusion.
In addition, the low density of aluminium results in a lightweight profile compared to other materials, which is easy to handle down the supply chain, as well as being cheaper and more environmentally friendly to transport.
How to change the design into a real product?
CAD drawings evaluation as per extrusion natures-
CAD drawings finalized-
Tooling drawings approved and 100% prepayment for tooling fee-
Tooling development-
Extrusion-
Off-tool samples for approval-
30% Prepayment for bulk production-
Bulk production-
Balance payment-
Delivery
Our advantages:
1. Technician team: over 30 years of experience in Aluminium extrusion for industrial application.
2. Rich source of Aluminium ingot locally.
3. Export staff embodied with fluent English communication skills, good knowledge in aluminium extrusion industries, and exports. Stable and reliable to help to sort out all problems.
4. Wide range of Aluminium alloy materials available.
5. Undertake any quality problems unconditionally.
FAQ:
Q1: Any MOQ required?
A: We accept any quantity you may need. But there will be set-up charge for small order.
Q2: What is the lead time for tooling and off-tool samples?
A: For small tooling (External size less than 229mm), it takes about 10-15 days for tooling and about 5 days for off-tool samples preparing.
Q3: How about the payment terms?
A: For tooling, 100% prepayment by TT bank; for bulk production, 30% prepayment by TT bank, and balance against delivery.
Q4: Will you send videos or pictures in the processing?
A: Yes, we will keep you updated about the status here by sending videos or pictures.
You can start with a small trial. Just send me your drawings!
Look forward to hearing from you.
Audited Supplier 
){kind=link}